How we calculate concrete quantities

Every calculator on MyPourCalc uses the same simple steps. You can reproduce any result with a pocket calculator.

1. Convert everything to feet

Inches are divided by 12, centimetres are divided by 30.48, metres are multiplied by 3.281 and yards are multiplied by 3. Mixing units in one calculation is fine because each box converts on its own.

2. Find the volume in cubic feet

  • Rectangle: length × width × thickness.
  • Cylinder: π × (diameter ÷ 2)² × height.
  • Quantity: multiply by the number of identical pieces.

3. Add a waste allowance

You choose 0%, 5%, 10% or 15%. We use 10% as the default because ground is rarely perfectly level and some concrete is lost during placing.

4. Convert to the units suppliers use

  • Cubic yards = cubic feet ÷ 27.
  • Cubic metres = cubic feet × 0.0283168.
  • Weight is estimated at 150 lb per cubic foot (about 4,050 lb per cubic yard). Real weight varies with the mix.

5. Convert to bags

We divide the volume by the typical yield of a bag and round up to a whole bag. The yields we use are 0.60 cubic feet for an 80 lb bag, 0.45 for 60 lb, 0.375 for 50 lb and 0.30 for 40 lb. Brands differ slightly, so check the label on the bag you buy.

Worked example

A 10 ft × 10 ft slab, 4 inches thick: 10 × 10 × (4 ÷ 12) = 33.33 cubic feet. That is 1.23 cubic yards. Adding 10% gives 36.67 cubic feet, or 1.36 cubic yards, which is 62 bags of 80 lb mix (36.67 ÷ 0.60 = 61.1, rounded up).

What our calculators do not do

They do not design structures, choose reinforcement or replace local building codes. They give quantities only. For structural work, retaining walls, foundations under buildings or anything that carries a load, speak to a qualified professional or your local building department.

Last updated November 18, 2026. Found a mistake? Tell us and we will check it.