Quick answer: multiply length × width × thickness (all in feet) and divide by 27 to get cubic yards. Add 5-10% extra for waste. The calculator below does this for you and converts the result into 80, 60 and 40 lb bags.
How to use this concrete calculator
- Pick the shape. Use Rectangle for slabs, patios, footings and walls. Use Cylinder for post holes, piers and round columns.
- Enter your measurements and choose the unit for each box (feet, inches, metres or centimetres). You can mix units, for example length in feet and thickness in inches.
- Set the quantity if you have several identical pieces, such as 6 post holes.
- Keep some extra. The default 10% covers spillage and uneven ground. Read the result in cubic yards if you are ordering a truck, or in bags if you are mixing yourself.
The formulas behind the numbers
Concrete is sold by volume. Ready-mix suppliers in the US, Canada and the UK/Australia (cubic metres) all start from the same idea: find the volume in cubic feet, then convert.
- Rectangle: cubic feet = length × width × thickness (feet). Cubic yards = cubic feet ÷ 27.
- Cylinder: cubic feet = π × (diameter ÷ 2)² × depth (feet). Then divide by 27.
Worked example 1: a small slab
A 10 ft × 10 ft slab that is 4 inches thick. Four inches is 0.333 ft, so 10 × 10 × 0.333 = 33.3 cubic feet. Divide by 27 and you get 1.23 cubic yards. With 10% extra the order is about 1.36 cubic yards.
Worked example 2: one post hole
A hole 12 inches wide and 4 feet deep. The radius is 0.5 ft, so π × 0.5 × 0.5 × 4 = 3.14 cubic feet, or 0.12 cubic yards. That is about 6 bags of 80 lb mix once you round up. Remember that the post itself takes up space, so you may need slightly less.
Which shape should I use?
| Project | Use this shape | Tip |
|---|---|---|
| Patio, garage floor, shed base | Rectangle | Measure the finished slab, not the formwork |
| Strip footing or wall | Rectangle | Calculate each straight run, then add the results |
| Fence or deck post | Cylinder | Set quantity to the number of posts |
| Round pad or column | Cylinder | Use thickness as the height |
How much extra concrete should I order?
Ground is rarely perfectly level and forms can bulge slightly, so the volume you pour is nearly always a little more than the drawing says. Around 5% is the minimum on a tidy, flat job. 10% is a safe default. Use 15% if the excavation is rough or you are pouring against soil. Running short in the middle of a pour is far more expensive than having a bit left over, because a cold joint or a second delivery is hard to fix.
Bags or a ready-mix truck?
As a rough guide, bagged mix is practical up to about one cubic yard, which is 45 bags of 80 lb. Above that, mixing by hand becomes slow and physically heavy, so most people order ready-mix. Suppliers often add a short-load fee for small deliveries, so ask for their minimum order before deciding. Use the concrete bags calculator to price the bag option, or read how many 80 lb bags are in a yard.
Common mistakes to avoid
- Mixing units. Entering 4 as feet instead of inches makes the answer twelve times too large. Check each unit box.
- Forgetting the base. A gravel base under a slab is not concrete, but it changes the depth you excavate. Calculate concrete only for the slab thickness.
- Ignoring thicker edges. Slabs that have thickened edges or footings need a separate calculation for those parts.
- Skipping local rules. Thickness, reinforcement and depth requirements depend on local building codes and soil. Confirm with your building department or a qualified professional.
Frequently asked questions
How do I calculate cubic yards of concrete?
Multiply length, width and thickness in feet to get cubic feet, then divide by 27. For example, a 10 ft by 10 ft slab that is 4 inches (0.333 ft) thick is 33.3 cubic feet, which is 1.23 cubic yards.
How many 80 lb bags make one cubic yard?
About 45 bags. An 80 lb bag yields roughly 0.60 cubic feet and a cubic yard is 27 cubic feet. See the full bag guide for 60 lb and 40 lb sizes.
How much does a cubic yard of concrete weigh?
Normal concrete weighs about 150 lb per cubic foot, so a cubic yard is roughly 4,000 lb (about 2 tons). Exact weight depends on the mix.
Should I add extra concrete to my order?
Yes. Most people add 5-10% for uneven ground, spillage and slightly bulging forms. Add up to 15% for rough excavations.
Does the calculator work in metric?
Yes. Choose metres or centimetres in the unit box. Results are shown in cubic yards, cubic feet and cubic metres so you can use whichever your supplier sells by.